These are the new JMP integrated fill/ dial indicator circuits with panel mount.
The new 2 and 3 circuit Fill Valve panel has three individual air circuits. It includes the new 1-way fill valve and high quality Pisco gauge that are used for each circuit and are securely mounted to a machined base. The circuits are marked for retract gear, brakes, and gear doors or retract and brakes for the 2 panel version.
On the rear side of the panel are two or three sets of airline locknuts. One set is for the retract gear operating valve and retract gear air supply. The second set is for the brake valve and brake air supply. The third optional set is for the gear door operating valve and gear door air supply. These can be configured as 1/8" or 4 mm fittings. The base configuration is 4 mm for the gear and 1/8" for the brake and doors. Other configurations can be ordered on request. The fittings are color coded: gold/ aluminum is 4 mm, blue aluminum is 1/8".
Every set comes with a dedicated mounting plate.
Just glue the mounting plate to the lower side of your equipment board or fuselage service compartment. Grind out the inside clearance shape and pull the air lines out through this hole. Very easy to install!
The Fill Valve panel also eliminates the need for T-fittings on three air circuits.
These are super high quality accessories CNC milled from aluminum billet and hard anodized to the tightest tolerances.
Available as 2 circuits or 3 circuits variants.
The panel is compatible with our High Flow series air lines.