This is the hyper scale LED light kit for our 1/7 scale Crusader.
It comprises of a high power gear controller with fan cooling, capable of driving 10 high power LED simultaneously on Lipo 3S supply. It uses a 3S Lipo accumulator to supply power to 1, 2 and up to 5W LED lights with nominal current of 120, 350 , 700 mAh/ 3W and up to 1500 mAh / 5W for flashing emitters ( Cree XP units ).
The unit features eight independent current-powered outputs and two coupled outputs.
Two outputs are for position lights (P1 and P2), three outputs are designed to power anti-collision flashing lights ( F2 ) and beacons ( F1 and F3 ). Additionally, three outputs supply the landing lights (L1, L2 and L3).
The unit can be configured as pilot controlled or plug in controlled. If controlled by the pilot, jumper "3p" allows you to select between a 2-position (Fly/Landing) or 3-position (Off/Fly/Landing) scheme from the Rx input.
The Crusader features the following lights, which are faithfully reproduced.
BuNo 138899 to 150350:
Two red fuselage beacons, one fin white strobe light, one red slat position light, one green slat position light, one fin white position light, one landing light.
BuNo 150351 to : 151 773:
Two red fuselage beacons, one fin white strobe light, one red slat position light, one red wing tip position light, one green slat position light, one green wing tip position light, one fin white position light, one landing light.
All the lenses are 3D printed in clear and red/ green transparent resin.
The kit comes with the loom and 3 USC connectors for the wings ( 3 sections ready to install ).
