Adhesive heatshrink tubing for wire looms ( 4ft length pieces).
These are aero spec heat shrink tubes with a 3:1 ratio. The walls of the tube are impregnated with a heat activated glue that will lock the product in place while retracting. The resulting interface will become weather proof.
Proudly made in the USA to the highest standards.
Shrinking at194F/ 90c.
1/2" OD: unshrunk ID= 12 mm, shrunk ID= 4 mm
1" OD: unshrunk ID= 24mm, shrunk ID= 8mm
1-1/2" OD: unshrunk ID= 38 mm, shrunk ID= 13 mm
Complies with MIL-I-23053 for continuous use at 257F/ 125c
Complies with MIL-DTL-23053 for resistance to cutting. Secant modulus: 25,000 PSI
Complies with ATSM D-149 for dielectric resistance of 500 V / Mil